Verifying the Digital Connection

Procedure

Connect an audio source to your audio interface.
Start recording, playing back, and mixing.
On computer 1, play back some audio.
Select Studio > MixConsole, and route the channel that contains the audio material to one of the digital output busses.
On computer 2, select Studio > MixConsole, and locate the corresponding digital input bus.

The audio that is played back should now appear in the application running on computer 2, and the input bus level meters should move.

You have verified that the digital connection works as intended. You can reverse this procedure so that computer 2 plays back and computer 1 listens.