In the Equalizer section, you can tune the sound of the reverb.
- EQ curve
-
Shows the EQ curve. You can use the EQ parameters below the display to change the EQ curve, or modify the curve manually by dragging the curve points.
- Activate EQ
-
This button to the right of the EQ parameters activates the EQ for the effect plug-in.
- Low Shelf On
-
Activates the low shelf filter that boosts or attenuates frequencies below the cutoff frequency by the specified amount.
- Low Freq (20 to 500)
-
Sets the frequency of the low band.
- Low Gain (-24 to +24)
-
Sets the amount of attenuation/boost for the low band.
- Mid Peak On
-
Activates the mid peak filter that creates a peak or notch in the frequency response.
- Mid Freq (100 to 10000)
-
Sets the center frequency of the mid band.
- Mid Gain(-12 to +12)
-
Sets the amount of attenuation/boost for the mid band.
- Hi Shelf On
-
Activates the high shelf filter that boosts or attenuates frequencies above the cutoff frequency by the specified amount.
- Hi Freq (5000 to 20000)
-
Sets the frequency of the high band.
- Hi Gain (-24 to +24)
-
Sets the amount of attenuation/boost for the high band.