Channel - Cubasis - 3.7

Displays your selected track's channel as it appears in the mixer. The following controls are available:

Pan fader:

Slide horizontally to adjust your track's stereo pan.

Volume fader

Slide the volume fader vertically to set the track's gain. The volume levels during playback or recording are visually shown on its right hand indicator. The display at the bottom of the channel shows the fader's value in decibels (negative values mean a decrease in volume).

Note

The pan and volume faders' value can be reset by double tapping them.

Mute

Use this button to toggle whether the channel's track is muted and therefore excluded from playback.

Solo

Soloing a track (or a group of tracks) excludes all the other tracks from playback.

Read

When enabled, all automation data on this track is read and applied during playback.

Write

Activate this button to record automation data live during playback / recording. More information on automation can be found here.

Monitoring (audio tracks only):

Monitoring outputs the audio input of your track routed through the track's effects.

Note

In order to prevent feedback, monitoring only works if hardware (e.g. headphones, a microphone or an audio interface) is connected.

Record Enable

Setting a track to Record Enable lets Cubasis know that you wish to record on this track. You can have multiple tracks Record Enabled at a time, which allows for recording on multiple tracks simultaneously.