Waves Q10 is a ten-band paragraphic equalizer for precise tonal shaping and removal of problematic frequencies.
It provides very large Q values and large boosts and cuts, so it is a very effective tool for surgically removing problematic harmonic noises.
Controls
- Input level
-
Adjusts the input to the EQ section. Range: -infinity – 0.0 dBFS
- Band select
-
To select a band, click on a band marker in the graph or Band ID button in the parametric section. To turn a band in on or off, click on the parametric On/Off button or double-click on the marker.
- Gain
-
Adjust the Gain knob vertically or drag vertically on a band marker to adjust gain. Range: ±18 dB
- Frequency
-
Adjust gain with the paragraphic knob or by moving a band marker sideways. Range: 16 Hz – 21,357 Hz
- Q
-
Adjusts Q value. Range: 0.5 – 30
- Filter Type:
-
Choose between bell, low or high shelf, low or high pass and proportional. Ctrl/Cmd-click on a marker in the graphic to toggle to a filter type. The shaded area on the graphic display indicates how the filters are affecting the signal. It is color-coded to reflect the selected band.
- Output Gain:
-
Range -24 dB – +12 dB. Trim used to move.
- Link
-
The L/R sides of a channel can be controlled together or independently. Tap slightly below or above the two input handles and drag your finger to move the left and right sliders together.