New Features - HALion - 7.5

HALion Help

Product
HALion
Version
7.5
ft:locale
en-US
Document type
Webhelp
ft:openMode
fluidtopics

The following list informs you about the most important improvements in HALion and provides links to the corresponding descriptions.

New Features in Version 7.5.0

Highlights

Spectral Oscillator
  • The Snapshot function on the Osc tab allows you to create rich, layered drone sounds with a full “wall-of-sound” character. See Osc Tab.

  • The new Model tab allows you to choose from the Tonal, Noise and Decompose model types for resynthesizing samples and adjust the Transient settings. See Model Tab.

  • On the Filter tab, you can now specify how closely the filter curve tracks the pitch offset of each stack copy via the new Filter Stack Follow parameter. See Filter Tab.

MIDI Polyphonic Expression (MPE)

HALion supports MPE, enabling expressive per-note control of pitch, timbre, and dynamics. You can set the MPE parameters either in Cubase/Nuendo or in the MPE Editor in HALion. See MIDI Polyphonic Expression (MPE).

Effects

The new Auto Gain Compressor effect was added in the Dynamics category. See Auto Gain Compressor.

More New Features

Options Editor
  • The Performance section in the Options editor now contains the new parameter Polyphonic Key Mode. See Performance Section.

  • The REX Import parameter was added to the Import section, allowing you to specify the save location for WAV files when importing REX files. See Import Section.

Sound Editor

In the Variation Groups section of the Sound editor, you can now specify the Preload Level and Desired Preload parameters for programs and layers, which allows you to specify whether the samples in a layer are loaded or unloaded. See Variation Groups Section.

Lua Script

The Output Messages section of the Lua Script module now allows you to select the font that you want to use for any syntax and execution errors or the output of the print function. See Lua Script.

New Features in Version 7.1.50

Options Editor

The UI Scaling parameter in the Edit section allows for better readability on native 4K monitors, for example. See Edit Section.

Sample Oscillator

The Channel pop-up menu allows you to select which channel or channels of a stereo or multi-channel sample are used for playback. See Sample Oscillator Section.

Grain Oscillator

The Channel pop-up menu allows you to select which channel or channels of a stereo or multi-channel sample are used for playback. See Sample Tab.

Spectral Oscillator
  • The Channel pop-up menu allows you to select which channel or channels of a stereo or multi-channel sample are used for playback. See Sample Tab.

  • The Phase Noise parameter was added to the Analysis tab of the spectral oscillator, allowing you improve the sound quality at lower Speed settings. See Analysis Tab.

Replace Samples Dialog

The Replace Samples dialog now contains a Read Markers from Sample File option which allows you to use any sample start/end and loop start/end markers saved within the replacement sample files in the current sample zone. See Replacing Samples.

Effects
  • The new Bit Crusher effect was added in the Distortion category. See Bit Crusher.

  • The new Fuzz Distortion effect was added in the Distortion category. See Fuzz Distortion.

New Features in Version 7.1.0

Highlights

Spectral Synthesis
  • The new Stack multi-oscillator mode was added for the spectral zones. It requires less CPU and allows for larger intervals than the Unison mode, which went under the name of Multi Oscillator in earlier versions of HALion. The multi-oscillator modes are available on the new Multi tab. See Multi Tab.

  • A new FX tab was added, which contains the new Blur effect. The Purity and Inharmonicity parameters were moved from the Osc tab to the FX tab. See FX Tab.

More New Features

Improved Tagging

The attribute dialogs in the MediaBay and its related windows have been modified, making tagging even easier and more intuitive. See Tagging Editor.

Mapping Editor

You can now select single or multiple notes, or a range between two notes via the Enable MIDI Mapping Selection Options. See Mapping Editor.

Spectral Oscillator

A Formant section was added to the Analysis tab of the spectral oscillator. This allows you to specify the frequency range in the spectrum where formants are corrected if Formant Shift is activated. See Analysis Tab.

Reading Sample Markers from Files
  • The new Sample submenu on the Sample editor context menu allows you to read sample start/end markers and/or loop markers from the sample files and to apply them to the corresponding sample zones. See Sample Editor Context Menu.

  • The new Sample submenu on the Program Tree context menu allows you to read sample start/end markers and/or loop markers from the sample files and to apply them to the corresponding sample zones. See Program Tree Context Menu.

Wavetable Editor

The Blocksize parameter was added to the wavetable overview section. See Wavetable Overview.

Replace Sample Dialog

The new file info field provides you with information on samples that you intend to use for replacing the current samples. See Replacing Samples.

Macro Page Editor
  • The new Jump to Resource button in the Properties section allows you to open the referenced source in the Resources Tree. See GUI Tree.

  • The Save Embedded Script as File option allows you to save embedded scripts that are used in templates as separate files. See Editing Templates.

New Features in Version 7.0.0

Highlights

MediaBay

The MediaBay has been redesigned to allow for an easier and quicker search. You can choose from filter tags that are proposed by the MediaBay based on your search settings, you can configure attribute menus to narrow down the search results, and you can save your search settings as presets to use them when looking for similar content. Furthermore, with the Synchronize Filter Settings with Selected Slot button, you can instruct the MediaBay to use the search settings last used for the selected slot, which makes it easier to exchange a program with a similar program, for example. See MediaBay.

Spectral Synthesis
  • With the new spectral zones, you can use spectral re-synthesis as a sound source. See Zone Types.

  • You can now re-synthesize your samples by means of spectral zones and the spectral oscillator. This allows for a wide range of creative sound editing. See Spectral Oscillator Section.

FM Synthesis
  • With the new FM zones, you can use frequency modulation as a sound source. See Zone Types.

  • In the FM Oscillator section of the Zone Editor, you can set up the new FM zones. See FM Oscillator Section.

Envelope Editing
  • The Envelope section has been redesigned, and several new editing functions are available. The new Shaper envelope mode has been added. Furthermore, the Pitch and User envelopes now have a Bipolar button, allowing you to switch the envelopes from unipolar to bipolar, and vice versa. See Envelope Section.

  • With the Edit tool, you can now edit multiple selected envelope nodes much more conveniently than in previous versions. See Node Editing.

Modulation
  • The entire modulation concept has been improved. For example, parameters that can be modulated are now indicated by small triangles in the Zone editor, making it easier to locate them. See Modulation.

  • You can now assign and edit modulation sources and destinations not only in the modulation matrix, but in dedicated modulation rows in the Zone editor. See Modulation Rows in the Zone Editor.

  • In the Zone editor, you can create modulations using drag and drop. See Creating Modulations Using Drag and Drop.

  • You can now directly jump to the edit section for a modulation source or destination from within the modulation row. See Modulation Parameters.

Wavetable Synthesis

You can now use multi-channel wavetables. See Wavetable Synthesis.

Macro Page Designer
  • In the Templates Tree, templates with attached scripts are shown in a different color. Furthermore, you can edit the script parameters in the Properties section, open a connected script for editing, or create a new script for a template. See Templates Tree.

  • You can now use SVG graphics in your macro pages, allowing for smoother scaling of elements. See Resources Tree Elements.

  • You can use decors in the Macro Page Designer, that is, definable rectangles of a fixed or scalable size that allow you to create simple graphical switch states without the need for a bitmap resource, for example. See Resources Tree Elements.

  • You can create color resources in the Macro Page Designer and use them in Font and Decor resources. See Resources Tree Elements.

  • Via the Resources Tree, you can now export SVG graphics to a folder in your system, to use them on other macro pages. See Resources Tree Context Menu.

More New Features

Load Dialog

When loading programs, layers, and multi-programs, you can now switch between the MediaBay and the File System pages. See Load Dialog.

Wavetable Oscillator

The following new functions have been added to the wavetable oscillator: Acceleration and Target Speed allow you to further modify the Speed parameter. Hold allows you to hold the last spectrum. The display now offers a channel selector. Furthermore, a Filter section was added. See Oscillator Tabs.

X-LFO

In addition to the two polyphonic LFOs, HALion 7 offers an X-LFO for synth, sample, grain, FM, spectral, and wavetable zones. This can be used to modulate two-dimensional XY parameters. See X-LFO.

Decompose

The Decompose function allows you to split your samples into their noise and tonal components and to edit those components separately. See Decompose Page.

Wavetable Editor
  • The Sample tab in the Wavetable editor has been redesigned, and several new functions have been added: You can now show a spectrometer in the waveform display, the Wavetable Creation Sensitivity parameter was added for the modes Spectral and Spectral Voiced, and the Zone Info Bar was added at the top. Furthermore, the Fixed Mode option was replaced by the new Window Size option, allowing you to manually specify the window size for the wavetable markers, either individually for each channel or for all channels. With the Include Window in Range option, you can instruct HALion to cover the entire sample when importing wavetables. See Sample Tab.

  • The Spectrum Analyzer tab was added to the Wavetable editor, allowing you to show the frequency spectrum of the oscillator output. Furthermore, a channel selector is now available for the 3D Map, 2D Wave, and Spectrum Analyzer tabs. See 3D Map, 2D Wave, and Analyzer Tabs.

  • Several new parameters were added to the Spectrum tab of the Wavetable editor. You can now switch the view between linear level and dB level. You can specify whether you want the frequency display to be linear or logarithmic. You can show/hide the spectral envelope, and you can set the formant resolution. Furthermore, you can copy and paste the phase spectrum across different waves, or randomize the phase spectrum. See Spectrum Tab.

  • The Wavetable editor now contains a Filter tab, allowing you to apply filters to individual waves or to the entire wavetable. See Filter Tab.

  • The parameters Pitch Envelope Playback and Channel Configuration were added to the wavetable overview section. See Wavetable Overview.

Effects
  • The REVerence effect now allows you to import and use your own impulse response files. See REVerence.

  • The new Bass Tape Ducking Delay effect was added in the Delay category. See Bass Tape Ducking Delay.

  • The new Studio EQ 24 effect was added in the EQ category. See Studio EQ 24.

  • The new Bass Envelope Filter effect was added in the Filter category. See Bass Envelope Filter.

  • The new Bass DI Driver effect was added in the Distortion category. See Bass DI Driver.

  • The new Bass Overdrive effect was added in the Distortion category. See Bass Overdrive.

  • The new Clipper effect was added in the Distortion category. See Clipper.

  • The new VST Bass Amp effect was added in the Distortion category. See VST Bass Amp.

  • The new Bass Octaver effect was added in the Pitch Shift category. See Bass Octaver.

  • The new Bass Chorus effect was added in the Modulation category. See Bass Chorus.

  • The new Bass Phaser effect was added in the Modulation category. See Bass Phaser.

  • The Compressor effect in the Dynamics category has a new High Ratio parameter. See Compressor.

  • The new Oscilloscope effect was added in the Tools category. See Oscilloscope.

Last but Not Least

Section and Module Presets

You can now step through the available presets using the new Previous Preset/Next Preset buttons. See Handling Section and Module Presets.

User Interface Improvements

At the top of the Options editor window, a navigation bar now allows you to show/hide and lock/unlock the different sections. Furthermore, the layout and spacing of the editor were optimized. See Options Editor.

Options Editor
  • The Performance section in the Options editor now contains the streaming settings. Furthermore, the parameter Host Automation Resolution has been added. See Performance Section.

  • In the Edit section, the following parameters were added: Apply Modulation Destination Depth in Live Displays, Home Screen, Pop-up Value Meter, Maximum Number of Results in MediaBay/Browser, External Bitmap Editor, and External SVG Editor. See Edit Section.

Slot Rack

When empty slots are hidden, you can now click the plus sign under the lowest slot in the Slot Rack to open the Load Program dialog. See Loading Programs into Slots.

Loading Init Programs

You can now load one of the available Init programs via the Slot Rack context menu. See Slot Context Menu.

User Icons

You can assign your own user icons to programs, so that they are displayed in the Slot Rack and in the program slot section at the top of the window. See Adding User Icons to Programs.

Tagging Editor

You can now edit the attributes of the selected program in a dedicated editor. See Tagging Editor.

Sound Editor

In the Sound editor for programs and layers, you can now show and hide the different sections. See Managing Sections.

Fingered Glide Mode

The Fingered parameter has an additional option: Any. This allows you to glide the pitch between any new note that is played legato. See Voice Control Section.

Note-off Trigger

You can now trigger samples at note off-events instead of at note-on events. See Voice Control Section.

Zone Editor

The Sample Oscillator section now has two pages: Mode and Sample. The AudioWarp functions have moved to the Mode page. All sample-related parameters can be found on the Sample page. See Sample Oscillator Section.

Sample Oscillator

You can now adjust the markers for Loop Start, Loop End, Start Range, and Release Start by dragging the corresponding marker lines in the waveform display. See Sample Oscillator Section.

Grain Oscillator Waveform Display

You can now adjust the markers for Loop Start, Loop End, Start Range, and Release Start by dragging the corresponding marker lines in the waveform display. See Sample Tab.

Sample Editor
  • The Sample Editor toolbar now only shows the tools for the selected tab. See Toolbar.

  • You can now show a spectrogram behind the waveform. See Waveform Display.

  • To change the sample range, you can now move the Sample Start and Sample End markers together. See Setting up the Sample Range.

  • To change the sample range, you can now move the Sample Start and Sample End markers together. See Setting up the Sample Range.

Loop Range

To change the loop range, you can now move the Loop Start and Loop End markers together. See Setting up a Loop.

MIDI Controller Assignments

You can change the MIDI controller for a MIDI controller assignment in the MIDI CC editor. See MIDI CC Editor.

Program Tree
  • The Program Tree toolbar offers a text filter to search the list. See Program Tree Toolbar.

  • The Program Tree offers a preview section for sample and granular zones. See Program Tree Toolbar.

  • You can now open the editor for the selected Program Tree element using the context menu command Open Editor in New Window. This function is also available in the Edit category of the Key Commands dialog. See Program Tree Context Menu.

Sample Import

Velocity $ was added as a new Pattern in the Mapping Options section of the Import Samples dialog. It allows you to import samples that only indicate the high velocity in the file name. See Import Samples Dialog.

Parameter List

A filter bar has been added to the parameter list, allowing you to search for parameters containing specific text strings. See Toolbar.

Library Creator

Clear Sub Preset Names was added to the Options section. This allows you to remove all sub preset names from all sub preset selectors before creating a VST 3 preset container. See Options.

Trigger Pads

You can create MIDI parts from the chords that are assigned to trigger pads by dragging the pads into your DAW. See Creating MIDI parts from Trigger Pads.

Browser

The Browser has been redesigned to allow for an easier and quicker search for files. The Filter by Sound Component pop-up menu was added to the toolbar of the results list. See Toolbar.