The first step in setting up your system for the podcast project is to establish the physical connections between your audio devices and your computer.
Prerequisite
You need:
-
An audio interface, such as the Steinberg UR22C
-
A microphone, such as the Steinberg ST-M01
-
Speakers or headphones, such as the Steinberg ST-H01
Make sure that all electronic equipment is turned off before making any connections.
The images and instructions refer to the Steinberg UR22C audio interface, in connection with the Steinberg ST-M01 microphone and the Steinberg ST-H01 headphones. They are just intended as an example. For different hardware components, the steps may differ. Refer to the operating manuals of the corresponding hardware manufacturers to install and use them properly. For more detailed general information on audio connections and setups, refer to the WaveLab Cast Operating Manual on steinberg.help.
Procedure
-
Connect your Steinberg ST-M01 microphone (Mic Line 1 (3) or Mic Line 2 (4)) via XLR, and set the +48V switch (2) on the back of the audio interface to ON.
Note
If you have already recorded the entire spoken content for your podcast and saved it as an audio file or as multiple audio files, you can skip this step.