Loudness Normalizer Dialog - WaveLab Elements - 12.0

If the desired loudness cannot be achieved with a simple positive gain change, a limiter is required, to prevent clipping.

You can specify the loudness that you want to achieve. The EBU R-128 recommendation for broadcasting is -23 LUFS.

Specifying high values may require a gain beyond the capabilities of the limiter, which can cause distortion.

We recommend that you use Statistics after specifying the loudness. This way, you know how much the gain needs to be raised and if peak limiting needs to be applied. Heavy limiting can degrade the audio quality. In this case, after applying the process, a warning is displayed, allowing you to undo it.

Sets Loudness to Achieve to the average loudness found in the audio file or audio selection.

This pop-up menu allows you to select a reference: the loudness of the entire file (EBU R-128 recommendation), the average loudest 3-second audio section (Top of Loudness Range), or the loudest 3-second audio section (Maximum Short-Term Loudness).

Allows you to choose whether you want WaveLab Elements to limit the sample values (Digital Peaks) or the analog reconstructed samples (True Peaks).

Specifies the maximum peak level of the resulting audio. The lower the value, the lower the loudness.

Affects the way the peak limiter works. A high setting maximizes the perceived loudness effect but can result in a slightly harsh sound.

You can adjust this parameter to optimize the balance between the sound quality and the effect that you want to achieve.

DC offset in the file affects the loudness computation. Remove DC Offset sets the DC offset to zero. We recommend that you keep this option activated.

If Loudness to Achieve requires peak limiting, it also reduces the loudness to some degree. This cannot be computed in advance and cannot be automatically applied to the gain change. Instead, several simulation passes are performed to find the best possible gain. This option allows you to define the precision that you want to achieve.

WaveLab Elements performs as many analysis passes as needed to match the precision that you want to achieve. You can use this option to specify the maximum number of passes to be performed.

As too much compression degrades the audio quality, you can specify a limit for the applied compression. The value can be set between -1 and -20 dB. Consider lowering the Loudness to Achieve value, as this produces better results.

If this option is activated, a warning message is shown in case the normalizing process does not meet the specified loudness/precision.

Opens a window that displays information about the file to be processed. It shows any DC offset, the current loudness, the current peak level, and the required gain to achieve the specified loudness. Furthermore, you are informed if limiting is required.